Supply silver gold red pet aluminum-plated color film, polyester color gold film laser film composite film
Product Name: VMPET (Metallized Aluminium PET film)
Product Introduction :
Thickness: 7,8,10,12,23,25,50,100,125,150,188μm etc.
Width: ≤2100 mm
Paper Core: 76mm(3″),152mm(6″)
Product Performance:
Strong adhesion, high brightness,Good barrier function,Thickness Uniformity
Non-Crack,No-Crystal Point,Well Composite Performance
Clean Transport Vehicles ,Non-Pollution,Aluminium layer Well
Application:
It's extensively used in the packaging industry ,Decoration,Textile,Architecture ,Used as Insulation film ,
Protective film etc.
Features:
1. Excellent insulation.
2. Reflects up to 98% of radiant energy and other kinds of heat
4. It is an effective barrier against moisture, air currents and vapors.
5. Light weight, clean, good flexibility and cushioning;
6. Waterproof, moistureproof, anti-static, tearing strength, anti-pull, leak resistance;
7. Protective, versatile and enviromentally friendly;
8. Can be fire resistant if required
| PRODUCT NAME | METALLIZED POLYESTER FILM Golden Color |
| ITEM | Unit | Index | Testing Condition |
TENSILE
STRENGTH | MD | Mpa | 213 | Temperature:23ºC
Relative humidity:40% |
| TD | Mpa | 201 |
| ELONGATION AT BREAK | MD | % | 121 |
| TD | % | 105 |
| C.O.F. | ------ | 0.56 |
| Corona Treatment | DYNE | 54 |
| WETTING TENSION OF ALUMINUM LAYER | OD | 2.0 |
| MOISTURE-VAPOR TRANSMISSION RATE | g/(m2*24h) | 0.97 | Temperature:38ºC
Relative humidity:91% |
| OXYGEN TRANSMISSION RATE | cm3/(m2*24h*0.1MPa) | 1.26
|
How to identify stained films:
One, check the clarity of the set, you can take two film contrast to look at the distance, slow moving film, there is no near the scene. And the membrane side to see if there is found like orange peel orange lines, if there is a relatively poor membrane. The diaphragm lining on white paper to observe the color, in the two sides of the diaphragm color inconsistent, must be dyed and aluminized composite film, and can not be magnetically controlled metal film.
Two, the main is to uncover the membrane layer smell, there is no stimulation of glue. Because the inferior film in the rubber layer contains a large number of benzene, toluene and other harmful gases, there is a larger odor. The harmful substances contained in these adhesive layers will continue to emit with solar irradiation, which will seriously affect the health of the owner.
Three, touch the color of inferior solar film by hand is added to the rubber layer in the installation glue, film is very thick, poor elasticity. There is no toughness and elasticity of the hand. You can shake it, a good solar film will have a crisp sound, and even some metal texture.
Other color pet film
Product Tags:
|
|
Supply Silver Gold Red Pet Aluminum-plated Color Film Polyester Color Gold Film Laser Film Composite Film Images
|
